|
|
|||
Silent Gliss Electric Curtain Systems
|
|
Well-proven for all Silent Gliss systems. Utmost reliability. Up to 15 ranges/systems can be operated with a maintenance-free high-tech remote control.
|
Fitting |
|||||
 |
 |
 |
 |
 |
|||
|
Up to |
 |
System 5800,
Profile 5810 for extremely heavy curtains; max. length 60m |
|
In mm |
500 |
||
|
Up to |
 |
System 5300,
Profile 5301 also for asymmetrical applications; max. length 25m |
|
|
5.4 |
500 |
|
|
Up to |
 |
System 5140,
Profile 5141 Max. length 10m |
|
|
5.4 |
500 |
|
 |
System 5100,
Profile 2191 Max. length 10m |
|
|
|
5.4 |
250 |
|
|
Up to |
 |
System 5150,
Profile 5141 Double function • Motor 9010, max. length 6m • Motor 9011, max length 6m |
|
|
5.4 |
n/a |
|
| Selecting the Correct System It is essential with electrically-operated curtain tracks to choose a system which can readily cope with the specific demands to be placed on it. The most crucial factor is the total weight of the curtains to be transported by it but then come further questions such as how the curtains are to stack, are there bends involved, ceiling or wall fix, the type of curtain heading etc. The curtain heading must be completely below the track or the guarantee is invalidated. Installation and electrical connection. Systems are usually supplied ready assembled except when they exceed 6-7 metres and are then broken down for transport purposes. Simple instructions will then be included showing how to reconnect the profile lengths using joining bridges. If required, Silent Gliss can carry out all installation work. A connection point, should be available at a distance on no greater than 1 metre from the motor. This should be discreetly situated behind the curtain taking care that the motor will not obstruct access to the socket. Surface wiring and switching is possible when concealed wiring is impractical. |
|
|
Fixing Preparation Where the system is to be fitted to the ceiling, (recommended in most cases), the surface must be absolutely flat. Any uneveness will cause problems in fitting the clamps and will almost certainly affect the functioning of the system. For the above reasons we recommend that a timber soffit is fixed the entire length of the ceiling where the track is to be mounted. Since this will need to be finished sympathetically to the decor of the room, thought should be given to this at an early stage. |
